2-Phase Step Motors 20 mm – 86 mm | Holding Torque 0.014 - 10.2 Nm
Driver Electronics 200 - 10,000 Steps/Rev. | 24 VDC - 130 VDC | Phase Current 0.5 A - 10 A
Planetary Gear ratio = 3 - 512 | Motor Flange 42 mm - 86 mm
Motor Accessories Step Motors with Terminal Box | Electromag. Brake | Encoder
5-Phase Step Motors 60 mm – 86 mm | Holding Torque 0.42 - 6.3 Nm

Cataloge download

 
   

2-Phase Step Motor - Technical Data, Dimensions and Motor Torque vs. Speed Characteristic:

20 mm Flange - 1.8° Full Step Angle - HECM-Series - Holding Torque up to 0.34 Nm
28 mm Flange - 1.8° Full Step Angle - HECM-Series - Holding Torque up to 0.14 Nm
28 mm Flange - 1.8° Full Step Angle - SECM-Series - Holding Torque up to 0.13 Nm
42 mm Flange - 1.8° Full Step Angle - HECM-Series - Holding Torque up to 0.93 Nm
42 mm Flange - 1.8° Full Step Angle - SECM-Series - Holding Torque up to 0.41 Nm
39 mm Flange - 0.9° Full Step Angle - ECM-Series - Holding Torque up to 0.10 Nm
39 mm Flange - 0.45° Full Step Angle - ECM-Series -Holding Torque up to 0.05 Nm
42 mm Flange - 1.8° Full Step Angle - SECM-Series with Encoder

 

 
 

2-Phase Step Motor - Technical Data, Dimensions and Motor Torque vs. Speed Characteristic:

56.4 mm Flange - 1.8° Full Step Angle - SECM-Series - Holding Torque up to 1.75 Nm
60 mm Flange - 1.8° Full Step Angle - HECM-Series - Holding Torque up to 3.3 Nm
86 mm Flange - 1.8° Full Step Angle - SECM-Series - Holding Torque up to 10.2 Nm
56.4 mm Flange - 0.9° Full Step Angle - SECM-Series - Holding Torque up to 1.95 Nm
56.4 mm Flange - 1.8° Full Step Angle - ECM-Series - Holding Torque up to 1.65 Nm
56.4 mm Flange - 1.8° Full Step Angle - SECM-Series with Encoder
56.4 mm Flange - 1.8° Full Step Angle - ECM-Series with Encoder

 

 
 

2-Phase Step Motoren HECM24 Series with Encoder:

In applications where it is necessary to know exact rotation or monitoring the steps Encoders are
able to control the rotor position. The combination of Step Motor and Encoder allows the structure
of a close-loop systems.

42 mm Flange - 1.8° Full Step Angle - HECM244-Series - Holding Torque 0.50 Nm
42 mm Flange - 1.8° Full Step Angle - HECM245-Series - Holding Torque 0.62 Nm
42 mm Flange - 1.8° Full Step Angle - HECM246-Series - Holding Torque 0.93 Nm

 

 
 

2-Phase Step Motoren HECM26 Series with Encoder:

In applications where it is necessary to know exact rotation or monitoring the steps Encoders are
able to control the rotor position. The combination of Step Motor and Encoder allows the structure
of a close-loop systems.

60 mm Flange - 1.8° Full Step Angle - HECM264-Series - Holding Torque 1.15 Nm
60 mm Flange - 1.8° Full Step Angle - HECM266-Series - Holding Torque 1.82 Nm
60 mm Flange - 1.8° Full Step Angle - HECM267-Series - Holding Torque 2.35 Nm
60 mm Flange - 1.8° Full Step Angle - HECM269-Series - Holding Torque 3.30 Nm

 

 
 

2-Phase Step Motoren with electromagnetic Brake with 3.3 Nm and 10.2 Nm Brake Torque:

mounted on the rear-shaft of the following Step Motor Series:

56.4 mm Flange - 1.8° Full Step Angle - SECM26-Series - Holding Torque up to 1.75 Nm
56.4 mm Flange - 0.9° Full Step Angle - SECM26-Series - Holding Torque up to 1.95 Nm
60 mm Flange - 1.8°  Full Step Angle - HECM26-Series - Holding Torque up to 3.3 Nm
86 mm Flange - 1.8°  Full Step Angle - SECM29-Series - Holding Torque up to 10.2 Nm

 
 
Katalog Download  

2-Phase Step Motor - HECM24-Series:

The 2-Phase-Step Motors of the HECM24-Series are a new Generation of High-Torque-Step
Motors. With a flange of 42mm they are the World wide strongest Step Motors in this Size.

42 mm Flange - 1.8° Full Step Angle - HECM24-Series - Holding Torque up to 0.93 Nm

 

 
 

2-Phase Step Motor - HECM26-Series:

The 2-Phase-Step Motors of the HECM26-Series are a new Generation of High-Torque-Step
Motors with a flange of 60mm (Nema24). The Step Motors are available in 4 sizes with Holding
Torque up to 3.3 Nm.

60 mm Flange - 1.8° Full Step Angle - HECM26-Series - Holding Torque up to 3.3 Nm

 

 
Katalog Download  

2-Phase Step Motor - SECM29-Series:

86 mm Flange - 1.8° Full Step Angle - SECM29-Series - Holding Torque up to 10.20 Nm

with and without Terminal Box available

 

 
   

5-Phasen Schrittmotoren:

60 mm Flansch - 0,72° Vollschrittwinkel - SECM56-Serie - Haltemoment bis 1,66 Nm
86 mm Flansch - 0,72° Vollschrittwinkel - SECM59-Serie - Haltemoment bis 6,3 Nm