2-Phase Step Motors 20 mm – 86 mm | Holding Torque 0.014 - 10.2 Nm
Driver Electronics 200 - 10,000 Steps/Rev. | 24 VDC - 130 VDC | Phase Current 0.5 A - 10 A
Planetary Gear ratio = 3 - 512 | Motor Flange 42 mm - 86 mm
Motor Accessories Step Motors with Terminal Box | Electromag. Brake | Encoder
5-Phase Step Motors 60 mm – 86 mm | Holding Torque 0.42 - 6.3 Nm

Radial force of the EC MOTION Step Motors

our recommendations of the radial forces and axial forces are as follows.
Please consider that the indicated distances from the Motor flange side are out indicated and not from the shaft end. (See symbol drawing)

 

 

HECM213... up to HECM215 [Shaft diameter= 4mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 11N 7N 5,5N
maximum Radial force: 31N 19N 14N



HECM223... up to HECM225 [Shaft diameter= 5mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 19N 12N 8N
maximum Radial force: 54N 35N 26N



SECM223... up to SECM225 [Shaft diameter= 5mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 20N 13N 9N
maximum Radial force: 58N 37N 27N

 

 

HECM244... up to HECM246 [Shaft diameter= 5mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 20N 13N 9N
maximum Radial force: 58N 37N 27N

 

 

SECM243... up to SECM245 [Shaft diameter= 5mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 20N 13N 9N
maximum Radial force: 58N 37N 27N



HECM264... up to HECM269 [Shaft diameter= 8mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 64N 37N 29N
maximum Radial force: 164N 113N 88N



SECM264... up to ECM2610 [Shaft diameter= 6,35mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 43N 30N 23N
maximum Radial force: 130N 90N 70N



SECM296... up to SECM2913 [Shaft diameter= 14mm]

Distance from Step Motor Flange: 10mm 20mm 30mm
recommended Radial force: 270N 180N 135N
maximum Radial force: 540N 360N 270N



SECM564... up to SECM569 [Shaft diameter= 8mm]

Distance from Step Motor Flange: 5mm 10mm 15mm
recommended Radial force: 164N 113N 88N
maximum Radial force: 64N 37N 29N



SECM596... up to SECM5913 [Shaft diameter= 12mm]

Distance from Step Motor Flange: 10mm 20mm 30mm
recommended Radial force: 97N 72N 59N
maximum Radial force: 290N 214N 176N



Axial force of the EC MOTION Step Motors

 
Axial force (recommended)                                      Load          
Shaft diameter= 4mm            3N
Shaft diameter= 5mm            5N
Shaft diameter= 6,35mm          10N
Shaft diameter= 8mm          13N
Shaft diameter= 9,525mm          25N
Shaft diameter= 12mm          31N
Shaft diameter= 14mm          70N